Laser marking systems, Standard features, Standard specifications – Conveyor Technologies LASER MARKER-1M User Manual
Page 4
STANDARD FEATURES:
• Footprint: 1 Meter Line Length X 59 Inch Depth
• Environment/safety: Class 1 Laser - Completely
Enclosed with PCB Transfer Opening
• Laser Marking system: Markem 3010Cr, synrad
Fenix 125 or cab Technologies DPL Magic Marker 100
• Laser Mark repeatability: ± 0.005”
• Throughput rate: Legend Dependant (9 sec. Avg.)
• number of Marks: Multiple Marks on same PCB
and Multi-up Panels
• Coding Capabilities: Bar Codes, 2D Codes
• Operating Controls: PC Based with Windows Platform.
• Laser Type: 10 Watt rF Excited CO2 Laser or a 3
& 8 Watt nd:YAg Laser, Air-cooled.
• networking: Ethernet Connection
• Print Verification: MicroScan
• Accessibility: Front and rear with Emergency
Interlocks
• Operation Modes: Auto Mark from Profile, Teach,
single Mark, Pass-thru
• Operator Interface: 15” Plasma Monitor W/keyboard
• Operator Options: Begin with new serial, Begin
from Last Part serial number
• Alarm: status Light Tower with Audible siren for:
Misprint/Verification Failure/ Production Run
Complete/ Emergency/ Auto run/ Manual Operation
• XYZ Verification: X = 18” Travel through THK
Precision guides with Manual Adjustment or
Automatic Precision Servo Positioning; Y = 16”
Travel through THK Precision Guides
with Manual Adjustment or Automatic
Precision Servo Positioning, Z = 2” Travel
Through THK Precision Guides with Manual
Adjustment or Automatic Precision servo Positioning.
• PCB Warp recovery: PCB Edge Lift and Clamp,
Lift Bed under PCB (Optional)
• recipe & Memory security: Password Protected
• PCB Handling Media: Edge Belt (Static Dissipative)
STANDARD SPECIFICATIONS:
• PCB size: Min. 2” X 4”
Max.16” X 18”
• PCB Height: 37.5” + / - 2”
• Edge Clearance: .100” from edge of PCB
• Air requirements: .2 cfm @ 65 PsI
• Power requirements: 20 amps @ 220VAC
• PCB Max Weight: 10 lb.
• PCB Min. Thickness: .010”
• PCB Max. Thickness: .180”
5313 WOMACk rOAD sAnFOrD, nC 27330 / OFFICE: (919) 776 - 7227 - FAX: (919) 774 - 3097
www.conveyor-technologies.com
MIssIOn sTATEMEnT CUsTOMEr sATIsFACTIOn
“whatever it takes”
LAsEr MArkIng sYsTEMs