Conveyor Technologies COMPONENT VERIFIER - Manual

The CTI Component Verification machine’s function is Inspection of critical
components on an assembly.
It was developed to check part numbers on high lead count QFP’s prior to
reflow to catch parts that were loaded incorrectly into the pick and place
machine by an operator.
Once in production, it was evolved to do much more. It uses PCB fiducials to
get an accuracy fix on its targets, then it is ready to inspect for missing parts,
check for correct part numbers on components, check bar code label, check for
components skew, and inspect for correct parts in given locations.
Programing is point and click. Simply insert a known good product,
jog the camera over the area of interest and press teach. Programing
can also be done off-line from DXF or script.
Precision movements are accomplished using servo drives and precision THK
ball screws.
The front of the machine has front opening door and a sliding top to allow the
operator full access to the work area.
COMPONENT VERIFIER DESCRIPTION
HIGH SPEED COMPONENT VERIFIER
PN:
CV-1M
► Conveyor with stops and edger’s for positioning product
► Light tower with alarm
► Interface to send results to customer’s database
► Three Axis closed loop servo gantry control (X/Y/Z)
► Component inspection camera also reads fiducial and
barcode labels
► Easy teach programming
► Steel welded frame
CUSTOMER SATISFACTION…………“Whatever it takes”
STANDARD FEATURES
OPTIONS
► Reject Conveyor for touch up / Inspection.