Audiovox NAV3000 - Manual (Page 34)

System settings
To adjust the Navigation System to your own preferences you can modify various
settings.
☞
Select “
Settings” from the main menu.
:
The “
System settings” menu is shown. The
following options are available:
Display
To rotate the display contents 180 degrees for
over-head mounting of the display.
Volume
To adjust the volume level of voice messages and to turn off verbal guidance advice.
Route selection
To select criteria which influence the route planning.
Language
To load languages for verbal advice and menu text from a separate language CD.
Guidance screen
To select the information shown in the status field of the guidance screen.
Measuring units
To select the measuring units for the displayed distances.
Mounting angle
To set the mounting angle of the navigation computer. See “Mounting instructions”
on page 49.
Speed correction
To set a correction factor for calculation of the estimated time of arrival and the
remaining travel time.
Date / Time
To set the time and date format and to adjust the offset for different time zones.
SDVC Mode
To adjust the speed dependent volume control.
System information
To get information on the hardware and software versions of the set (important in
case of service).
Service
Code protected menu for diagnostic purposes.
Trip computer
To set and activate a speed warning and to reset the trip computer.
Return
To return to the main menu.
SYSTEM SETTINGS
34
System settings
Display
Volume
Language
Route selection