Audiovox NAV3000 - Manual (Page 16)

Keyboard illumination
The keyboard of the remote control is illuminated when you press one of the keys. The
illumination is switched off automatically after a few seconds. When inserted in the
holder the keyboard is illuminated permanently as long as the ignition is switched on.
Switching on / off
The navigation system is switched on / off together with the ignition.
☞
Turn on the ignition.
:
As soon as the navigation system is operable, a safety notification for usage of the
system appears on the display.
☞
Read and accept this notification by pressing OK on the remote control.
:
The “
Main menu” appears.
After a few seconds the system is initialized and you can select the navigation
functions (options in highlighted letters).
Stand-by mode
If you do not wish to hear guidance advice, you can set the navigation system to its
stand-by mode.
☞
Select “
Stand-by” from the main menu.
:
The display is turned off and audible guidance advice is muted.
☞
Press one of the cursor keys
4, 6, 8, 2 or the OK key on the remote control to
resume normal operation.
If the navigation system was turned off in stand-by mode, it restarts in stand-by mode
when turning the ignition on again.
Volume
You can adjust the volume of the audible guidance advice as follows:
☞
Push the
+ key once or more than once to increase the volume of the voice
messages.
☞
Push the
- key once or more than once to decrease the volume of the voice
messages.
:
The adjusted volume is announced.
OPERATION
16