American Audio SWITCH - Manual (Page 8)

© American Audio ® - www.americanaudio.us - Q-Spand MKII™ Instruction Manual Page 8
Q-SPAND MKII™ FRONT PANEL - CONTROLS AND FUNCTIONS
1. MICROPHONE EQ SECTION -
MICROPHONE TREBLE CONTROL - This knob is used to adjust the treble levels of the
Microphone with a maximum signal gain of +12dB or maximum signal decrease of -30dB. Turning the
knob in a counter-clockwise direction will decrease the amount of treble applied to the microphone
signal, turning the knob in a clockwise direction will increase the amount of treble applied to micro-
phone signal.
MICROPHONE BASS CONTROL - This knob is used to adjust the low frequency levels of the
microphone with a maximum signal gain of +12dB or maximum signal decrease of -30dB. Turning the
knob in a counter-clockwise direction will decrease the amount of bass applied to the microphone
signal, turning the knob in a clockwise direction will increase the amount of bass applied to micro-
phone signal.
2. TALKOVER CONTROL - This function decreases all signal output except the microphone signal.
The amount of decrease is preset to -14dB and is not user selectable.
3. MICROPHONE 1 - This combo jack will accept a standard 1/4 plug or XLR 3-pin balanced male
plug. The volume output level for this microphone will be controlled by its own respective CHANNEL
KNOB (31).
Note: We recommend that you use a 500-600ohm microphone for the best sound
quality.
4. SOURCE SELECTOR SWITCH - These switches are used to select the input source assigned to
each channel. Each channel may only be assigned one input source at a time. This switch must be in
-40
30
20
10
7
4
2
0
2
4
7
10
-40
30
20
10
7
4
2
0
2
4
7
10
1
21 22 23 24 25 26 27 28 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2
31 30 29 19 20