Mounting, Setting group/module switches – CTI Products AIB AstroTAC Interface User Manual
Page 15
Advertising
AIB Hardware Reference
Mounting
CTI Products, Inc.
68-10842-115
10
6. Mounting
Please refer to reference 1, Mounting Options, for details of mounting the AIB
module.
CAUTION
Make sure that any mounting screws used to secure unit to a bracket do not
protrude into the unit’s enclosure more than 1/8 inches from the bottom surface of
the unit.
Using a larger screw that touches the pc board inside the unit may damage the unit
when it is powered. Doing so will void the unit’s warranty.
7.
Setting Group/Module Switches
Please refer to the MCN System Manual, reference 1, Setting the Unit Address,
for details about the Group and Module switches on the AIB module.
Advertising