CTI Products EXB-232 Asynchronous Serial System Extender User Manual
Page 25
68-11089-115
21
Appendix B EXB Module Specifications
DC Power Input: 10 to 30 VDC, unregulated
Input Power: 5 watts maximum - this counts as two MCN module loads when using
network cable power distribution.
DC Drop:
1.4 VDC drop from Power input (or Network In) connector
to Network Output connector.
Size: 7.5” D x 5.6” W x 1.6” H
Operating Temperature: 0 to 60
°C
Humidity: 10-95% non-condensing
Mounting:
Desktop with integral non-slip feet
Wallmount or 19” rack mount with optional adapters
Modem: (EXB-TELCO
Only)
V.32 terbo 19200 BPS, 2/4 wire leased line
Simultaneous voice plus data
Serial Data: (EXB-SERIAL Only)
RS-232C
9-Pin Male, DTE (PC-AT pinout)
Asynchronous, 1 Start, 8 Data, No Parity, 1 Stop Bit
Baud rates: 1200, 2400, 4800, 9600, 19.2K 38.4K, 57.6K, 115.2K
Approvals:
Safety: UL
1950
CSA 1950
EN 60950-1992
Listings:
CSA C22.2 (EXB-TELCO only)
FCC Part 68 (EXB-TELCO only)
Emissions:
FCC Part 15 Class B
DOC Class B
EN55022
Susceptibility: IEC 801-2
IEC 801-3
IEC 801-4
EN50082-1