Acer ALH-616ds - Manual (Page 19)

2.4.3 Network Status Indicators
There are 3 LED indicators to indicate the network status of each connection
port.
Note: It's normal either Master or Slave LED will display when hubs
are stacking.
Note: The difference between Master hub and Slave hub will be
explained in chapter 3.
Collision: Indicate if a collision occurs in 10Mbps or 100Mbps domain.
Bridge: Indicates if the bridging function is enabled.
Color On/Off Indication
Green On Bridge function enabled
Off Bridge function disabled
Color On/Off Indication
10 Collision Orange Blink Collision in 10Mbps domain
Off Normal
100 Collision Orange Blink Collision in 100Mbps domain
Off Normal
Color On/Off Indication
Master Green On Master
Off Malfunction
Slave Green On Disable
Off Malfunction
Note: The slave hub will provide a Bridge Uplink Port, see chapter 3 for
details
2-11