Controlled Products Systems Group 8054-081 - Manual (Page 4)

Programming Continued
8054-065-D-3-12 Copyright 2012 DoorKing, Inc. All rights reserved.
120 Glasgow Avenue
Inglewood, California 90301 U.S.A.
This device complies with the FCC Rules Part 15. Operation is subject to the following two conditions:
1.) This device may not cause harmful interference.
2.) This device must accept and interference received, including interference that may cause undesired operation.
This class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel brouilleur du Canada.
Print Mode: Turn “Real Time Mode” ON or OFF.
1. Press and the four-digit Master Code.
2. Enter to print in “Real Time Mode” or enter NOT to print in real time mode, then press
In either case, the transactions are stored in the receiver’s buffer and can be printed later (See “Print” below).
If programmed for “Real Time Mode”, printer MUST be connected and turned ON, otherwise the receiver will sound four long beeps.
3. Press TOGETHER to end programming or wait 20 seconds.
3
1 0
5 “BEEP”
“BEEP”
“BEEEEEEEEEP” 0
Print Transactions for a Specific Day ONLY: Used to print only a desired day’s transactions and not the entire buffer.
1. Press and the four-digit Master Code.
2. Enter the two-digit specific month desired (01 - 12), then press
3. Enter the two-digit specific day of the month desired (01 - 31), then press
Only the desired day’s transactions stored in the receiver’s buffer will print. The receiver will sound one long “BEEEEEEEEEP” when
finished.
3 4 “BEEP”
“BEEP”
“BEEP”
Print: Print all transactions stored in the receiver’s buffer.
1. Press and the four-digit Master Code.
The transactions stored in the receivers buffer will print. The receiver will sound one long “BEEEEEEEEEP” when finished.
3 7 “BEEP”
Clear Transaction Buffer: WARNING: Deleted transactions CANNOT be retrieved. Up to 2800 transactions are stored in buffer.
1. Press and the four-digit Master Code.
2. Enter 9999, then press
This sequence will take about 5 minutes of “BEEPS” every three seconds, one long “BEEEEEEEEEP” will be heard when finished.
3 6 “BEEP”
“BEEP”