Alpine TDM-7586RB - Manual (Page 18)

16
-EN
Remote Control Operation
8 g DN Button
Radio mode: SEEK (DN) Button
CD changer mode: Press the button to go back
to the beginning of the current track.
Tape mode: Press the button during tape play to
fast rewind the tape respectively.
9 f UP Button
Radio mode: SEEK (UP) Button
CD changer mode: Press the button to advance
to the beginning of the next track.
Tape mode: Press the button during tape play to
fast forward the tape respectively.
! 9 Button
Radio mode: Pressing the button will select, in
descending order, stations programmed into the
radio's presets as shown below.
→ 6 → 5 ... 1
CD Changer mode: DISC Select (DN) Button
Press the button to select a disc in descending
order.
Tape mode: Press the button once during tape
play to return to the beginning of the current
selection being played.
" Mute Button
Press the button to lower the volume by 20 dB
instantly. Press the button again to cancel.
# Audio Processor Button
This button is not used.
Controls on Remote Control
(TDM-7586RB/TDM-7584R only)
1 Power Button
Press the button to turn the power on/off.
2 Source Button
Press to select the audio source.
3 -/J Button
Press the button to switch between the Play and
Pause modes for Tape or CD.
4 ANGLE 89 Buttons
This button is not used.
5 Band/Program Button
Radio mode: BAND Button
Press the button and the band will change as
shown below.
→ FM1 → FM2 → MW → LW
Tape mode: PROG button
Press the button during tape play to change the
tape direction to play the other side of the tape.
6 Volume Adjustment Buttons
To increase the volume level:
Press the
L button
To decrease the volume level:
Press the
K button
7 8 Button
Radio mode: Pressing the button will select, in
ascending order, stations programmed into the
radio's presets as shown below.
→ 1 → 2 ... 6
CD Changer mode: DISC Select (UP) Button
Press the button to select a disc in ascending order.
Tape mode: Press the button once during tape
play to advance to the beginning of the next
selection.
1
2
3
4
#
!
9
"
6
5
7
8
Remote control sensor