English – Controlled Products Systems Group 1049062 User Manual
Page 16
Advertising
6
ENGLISH
Whenever doing maintenance, always check correct
settings of the by-pass screws, system balancing, and
efficiency of safety devices. The automated system does
not require any type of oil topping-up.
END FOOT
The end foot allows the beam to rest when closed and thus
prevents the profile bending downward.
For any repairs, contact FAAC’s authorised Repair Centres.
If a foot is installed, the balancing spring must be
readjusted.
10 MAINTENANCE
11 REPAIRS
Fig. 18
Advertising