Controlled Products Systems Group 6300-080 - Manual (Page 50)

5.3 Accessory Items
The following accessory items are available for the model 6300 swing gate operators.
Contact Sensors Contact sensors for use as a secondary entrapment protection device.
Miller Edge, Inc., MGO20, MGR20, MGS20
Photo Cell Non-contact (photo-cells) sensors for use as a secondary entrapment
protection device.
MMTC, Inc. Model IR55
DK P/N 8080-010
MMTC, Inc. Model 60-278 DK P/N 8080-011
Carlo Gavazzi Type PMP12 DK P/N 8080-030
Carlo Gavazzi Type PMT DK P/N 8080-031
Loop Detector Detectors plug directly into ports on circuit board simplifying wiring.
P/N 9410-010 - Single channel detector
P/N 9409-010 – Two-channel detector
Magnetic Lock Magnetic Gate Lock Kit provides an excellent means to secure swing
gates and is a fail-safe device allowing emergency vehicle access upon
power outage.
DoorKing P/N 1216-080 and 1216-081
Remote Reset Provides a remote station to reset an operator in a hard shutdown
condition. Must be mounted in line-of-site of the gate and operator.
Includes visual and audible signals. P/N 1404-080.
Control Station Three button interior and exterior control stations provide manual open-
close-stop gate operation. P/N 1200-006 and 1200-007
Control Station Interior station mounts into single-gang electrical box. Provides open
and hold open manual operation of the gate. P/N 1200-017.
Interconnect Cable Interconnect wire cable contains all the necessary wires to interconnect
primary / secondary operators.
Cable length 30 feet. P/N 2600-755
Cable length 40 feet. P/N 2600-756
Cable length 50 feet. P/N 2600-757
Time Clock 7 day and 365 day time clocks can be used to automatically open gate at
pre-set time and days. Compact clock fits inside the operator.
P/N 2600-791 - 7 day clock P/N 2600-795 - 365 day clock
Torsion Rods Torsion rod assembly is used on uphill swing gates for counter balance.
P/N 1203-084
Hinges Heavy-duty ball bearing hinges provide easy swing gate operation.
P/N 1200-009, P/N 1200-019, P/N 1200-039.
Surge Devices High and low voltage surge suppressers help prevent circuit board failure
caused by lightning strikes and power surges.
P/N 1876-010 - High Voltage, P/N 1878-010 - Low Voltage
Moly D Grease Molybdenum Disulfide (Moly D) multi-purpose grease for worm gear.
P/N 2600-770 - 14 oz. tube
Gate Scale Use to test torque required to move gate. P/N 2600-225
Speed Bumps Prefabricated six-foot speed bump reduces traffic speed through gate
system. P/N 1610-150
Page 50 6300-065-E-4-08