Controlled Products Systems Group 307010 - Manual

should be reliable at this distance but environment and
location of both the transmitter and receiver will affect
the range. If the transmitter is stowed well out of sight, it
may be necessary to remove it from its mounting and
hold near the windshield. Try different locations and
positions. If operation is still unsatisfactory, the problem
may be isolated by:
1 . Checking the door operator. If the door will not open
when the wall button is pressed, the problem is likely
to be the operator. If the door will open by pressing
the wall button, but not when the radio control button
is pressed, the problem is probably in the radios.
2. Replacing the transmitter battery. If, after performing
the above operational checks, the controls still do not
function, they should be returned to your dealer for
repair or replacement.
CAUTION: Any changes or modifications in intentional or
unintentional radiators which are not expressly approved by
LINEAR CORPORATION could void the user’s authority to
operate this equipment. This applies to intentional and
unintentional radiators certified per part 15 of the F.C.C.
rules and regulations.
This device complies with FCC Part 15 and Industry Canada
Rules and Regulations. Operation is subject to the following
two conditions: (1) This device may not cause harmful inter-
ference, and (2) This device must accept any interference
received, including interference that may cause undesired
operation.
LINEAR CORPORATION
2055 Corte del Nogal
Carlsbad, CA 92009
Copyright © 2000 Linear Corporation 214946 B
INSTALLATION INSTRUCTIONS
MICRO-TRANSMITTER MODEL 3070
Congratulations! You have just purchased a Micro-Code
Digital Transmitter, which we believe to be the finest
product of its kind on the market. With a little care this
transmitter should provide you with many years of
excellent service. Please take a moment to read the
following instructions and you will find that setting your
new transmitter will be quite an easy matter.
ACCESSING THE CODE SWITCH AND BATTERY
COMPARTMENT
The model 3070 Micro-Transmitter case is composed of
2 halves which can be opened by inserting a small coin in
the slot provided. A twisting motion of the coin will cause
the 2 halves to separate. Once opened you will have
access to both the code setting switch and the battery
compartment. (See Diagram #1)
INSTR,INSTL,MC3070,MICRO-TX
LINEAR P/N: 214946 B
INK: BLACK
MATERIAL: 20 LB. MEAD BOND
SIZE: 6.250" x 4.500"
SCALE: 1-1
SIDE 1 OF 2
®