American Access Systems RemotePro KP 12-000sg - Manual (Page 4)

Page 4 American Access Systems / Security Brands, Inc.
steP 1-moUntIng the UnIt
mounting the unit to your own pedestal
The 12-000sg is designed to mount in a standard 2 x 4 electrical box. Two security screws are provided to prevent
tampering. American Access Systems can provide the proper tool to install these screws for a additional cost. They
are standard (snake eyes) screws.
Once you have made your connections, fold the wires into the box and secure the keypad being careful not to
pinch any wires between the box and keypad panel.
The 12-000f includes a flush mount back box to be inserted in whatever type of wall you are installing to. Use this box
as a template to cut the proper size hole in the wall for mounting. You will have to drill your own mounting holes to
secure the box in the wall.
steP 2-CAbLIng UsIng AAs 24-XXX mAsteR
CAbLe tYPe: 6 ConDUCtoR tWIsteD FoIL shIeLDeD
(22 guage beLDen #9942)
mAX DIstAnCe: 500 Feet
Run 6 conductor twisted foil shielded cable between the 12-000 SLAVE and 24-100(i), 24-500(i), 24-1000(i), or 24-2000(i)
MASTER. Keep the cable separated from high voltage 6” for every 110 volts. Connect the six conductor cable to the
Master Keypad Terminal Board and 12-000 Harness. Refer to the Master keypad instructions for Weigand Color Codes.
The 12-000sg is designed to mount in a standard 2 x 4 electrical box. Two security screws are provided to prevent
tampering. American Access Systems can provide the proper tool to install these screws for a additional cost. They
are standard (snake eyes) screws.
Once you have made your connections, fold the wires into the box and secure the keypad being careful not to
pinch any wires between the box and keypad panel.
The 12-000f includes a flush mount back box to be inserted in whatever type of wall you are installing to. Use this box
as a template to cut the proper size hole in the wall for mounting. You will have to drill your own mounting holes to
secure the box in the wall.