Impulse AUPS-A10 - Manual

w w w . i e i w o r l d . c o m
Optional Peripherals
Intelligent DC UPS Module
Model Name AUPS-A10 / AUPS-A20 AUPS-B10 / AUPS-B20 AUPS-C20
Input Power
AUPS-A10 (12V) AUPS-B10 (12V) 9~36V
AUPS-A20 (9~36V) AUPS-B20 (9~36V) x
Dimensions 150 x 95 x 34 mm 170 x 150 x 34 mm 233x197x 59mm
Battery Capacity 28 Wh (Watt/Hour) 56 Wh (Watt/Hour) 200 Wh (Watt/Hour)
Output Power 60W (5A@12V) 100W (8.3A@12V) 100W (8.3A@12V)
VESA Support (mm) 75 x 75 75 x 75 / 100 x 100 75 x 75 / 100 x 100
Features
• 60W (5A @ 12V) or 100W (8.3A @ 12V) output
• 28Wh or 56Wh, for more than 140 minutes operation time (depending on panel PC power requirements)
• Rugged metal enclosure for standard VESA 75/100 mounting
• Web-based, remote network management, no software installation required
• Local PC-based monitoring software for input detection and battery status monitoring
• Auto shut down when battery low
• Remote DC output on/off switch for external switch installation
• Provides stable power to the PC during line sags and spikes and absorbs power surges and transients,
protecting expensive equipment
High Energy Density / Lightweight / Compact DC
to DC UPS & Power Module
Protect your panel PC from electrical damage and
greatly reduce the risk of losing data.
The UPS module serves as temporary power dur-
ing a short break in power and allows a safe system
shutdown for longer periods of power loss.
LED Signal Table
LED 1 LED 2 LED 3
Color Green Yellow Orange
Function Power Input Charging Status Battery Status
Dark DC Power Out
Light DC Power In Discharging Battery Full
Blinking Charging Battery Low
B. Battery Status
USB Console Port
1.DC 9V~36V input by terminal block
(Only AUPS-A20 / AUPS-B20)
2. (1) Only 12V input by DC jack
(AUPS-A10 / AUPS-B10)
(2) Wide 9V~36V input by DC jack
(AUPS-A20 / AUPS-B20)
D. Networking UPS Management Port
by RJ-45 Ethernet
A. Dual Power Input Connector
C. DC Power Button
DC Remote Power Button
12V/9~36V DC Input, 12V DC Output Uninterruptible Power
Supply Module with Diagnostics
• VESA 75 or VESA 100 mounting
• 9-36V input through terminal or power jack, or 12V through power jack only
• Battery status and charge monitoring utility. Remote network management capabilities
■ Intelligent UPS Module
Optional Peripherals-2012-V10
New