Atlantis Land A02-PCI-W54M - Manual (Page 30)

ENGLISH
31
If selected AP supports WEP or WPA/WPA2 You have to
chose Authentication and Security tab in order to connect to
the wireless network. For more detailed instructions on
configuring and using the Wireless MIMO Card, please refer
to the online manual.
5 Uninstallation
To uninstall the Wireless MIMO NIC Card, go to the Control Panel of your system.
•
Open the Add/Remove Programs.
• Select the Ralink Wireless Lan Card in the Add/Remove Programs and then
click on the Remove.
• Click on Remove ALL [or Overwrite the older version install without
remove].
• Then chose Yes, I want to restart my computer and click Finish.
• Now You can remove the Card.
6 Troubleshooting
Common Problems and Solutions
This chapter provides solutions to problems that may occur during the installation and
operation of the WLAN 802.11g PCI/PCMCIA Adapter. Read the descriptions below to
solve your problems.
1.
My computer cannot find the Adapter
ƒ Make sure the Adapter has no physical damage.
ƒ Make sure the Adapter is properly inserted in the PCI/PCMCIA slot.
ƒ Try the Adapter in other PCI/PCMCIA slots.
ƒ Try another Adapter in that particular PCI/PCMCIA slot.
2.
Cannot access any network resources from the computer.Make sure that
the notebook PC is powered on.
ƒ Make sure that the notebook PC is powered on.
ƒ Make sure that the Cardbus is configured with the same SSID and security
options as the other computers in the infrastructure configuration.