Program selector as program progress display, Temperature selector – AEG KO-LAVAMAT 62600 User Manual
Page 11
Structure of the appliance
11
(RINSE)
Separate rinse, e.g. for rinsing fabrics washed by hand (spin according
to the type of washing).
(CONDITIONER)
Separate fabric softening, separate starching, separate impregnating
(one rinse runs, liquid conditioner from the compartment À
is
added).
(SPIN)
Spin after a
(Rinse hold), or separate spinning of hand-
washed fabrics.
(SOAKING)
Separate soaking (maximum 40°C), the washing stays in the suds at the
end (not selectable for Woollens setting).
3
After soaking the main washing cycle required must be set, the pro-
gram does not continue automatically.
(PUMP OUT)
Pumping out the water after a
/Rinse hold (without spin).
Program selector as program progress display
The program selector serves as a program progress display by turning
clockwise to the end of the program. For the programs Stain, Main
wash and Quick wash, the program selector moves to a position directly
behind Quick wash immediately after the program starts. Then it dis-
plays the program progress as usual.
Temperature selector
The following temperatures can be set on the
temperature selector:
(Cold), 30, 40, 50, 60, E, 70, 80, 95
2
Position E (energy saving program) is suitable
for slightly to normally soiled linen;
reduced temperature to approx. 67°C.