Impulse R15L600-MRM2 - Manual

Model # R15L600-MRM2
Marine Bridge System Display
15"
Marine Bridge System Display
15"
Features:
Mechanical Design Drawings
TFT Characteristics:
Pixel Number
Pixel Pitch(RGB)
Contrast Ratio
Light Intensity
Viewable Angles
Active Display Area
Max Colors 1024 x 768
0.297 (H) x 0.297 (V) mm
350:1(typ.)
2 400 cd/m (typ.)
-75~75(H);-60~50(V)
304.1 (H) x 228.1 (V) mm
16.7M (8bit/colors)
:
:
:
:
:
:
:
User Controls:
Mechanical and Environmental:
Mechanical Mounting
Operating Temperature
Operating Humidity
Anti-Vibration
Anti-Shock
* SAW touch for IP54
Panel (Flush) mount with IP66*, VESA, Bracket mounting
-10 to 55 deg.C (-20 to 60 deg.C for optional heating)
5% to 95% (non condensing)
5Hz~500Hz / 1Grms/3 Axis
15G, 11ms duraiton
:
:
:
:
:
Input Signals:
RGB Signal
Composite Video
S-Video Signal
DVI-D Signal
DC Power Signal
AC Power Signal (Optional)
Touch Screen (Optional)
Remote via RS-232 (Optional) :
:
:
:
:
:
:
:
Available Options:
AR Safety Glass Options
AC power Options
Bracket Mounting Options
Touch Screen Options :
:
:
:
Power On/Off via front button
VR Brightness Knob Control
Power Mode Status LED
On Screen Display control(OSD)
OSD Remote Control via RS-232
Note: All Specifications are subject to change without prior notice!
SAW, 5 Wire Resistive
3mm Anti-reflective protection glass
Yes (90 to 265 V AC power input)
Yes (One robust bracket can adjust from -10 to 30 deg.)
Hyper Dimming
High Quality Panel
Wide Voltage Range Input
IP65 OSD Fornt Panel Design
Anti-Shock and Vibration
Anti-Corrosion & IP Proof
Touchscreen/ Protection Glass
:
:
:
:
:
:
:
Dimming knob control backlight brightness from nearly 0% to 100%
High resolution 1024 x 768 panel
IP66 aluminum housing with powder coating design (IP54 rear)
24 V DC to DC power input acceptable (Isolation Resistance)
High quality touchscreen / AR protection glass for option
PIP(picture in picture) function and multi-video inputs
Ease of use front panel OSD control
Enhanced shock and vibration resistance
Multiscan Function
:
D-SUB 15P connector(female)
RCA phono plug
S-Video (SVHS) plug
DVI-D input 24pin connector
Screw terminal block
Std IEC Inlet
D-SUB 9P connector (female)
D-SUB 9P connector (female)
C ertificatio n an d A p p ro vals : IE C 60945, DV N 2.4, I A C S -E 10
D N V Typ e A p p ro val, CE , FC C
IP66 OSD
Front Panel
Front Bezel
Touch / Glass
(Optional) Panel
(Optional)
Inverter Board
Wide Voltage Range Power Module
Touch Controller
Metal Frame
Scaling Board
Front View
Side View
Rear View
Bottom View
24V DC
Terminal Block
RS232
for Touch
S-Video
Composite DVI
VGA RS232
Remote Control
for
Cutout
GND
* Note: this is a simplified drawing and some components are not marked in detail.
Please contact our sales representative if you need further product information.
Type Approved
Product
Power Specifications:
Power Supply Options
Power Consumption
:
:
24 V DC power supply with Terminal block (Default, Isolation
Resistance),90 to 265V AC power supply
40 W typical, normal operation
Modularized Construction
Revised Date : 03/02/2011
IP66 Proof