Impulse R20L100-RKA2ML - Manual

▪▪ Model Name: R20L100-RKA2ML
▪▪ Certified with MIL-STD 810F/G
▪▪ Certified with MIL-STD 461E/F
▪▪ High Image Quality Resolution up to 1600 x 1200 pixels
▪▪ Wide View Angle Display for ± 89 degrees
▪▪ Anti-Corrosion Housing / Fanless
▪▪ Standard AR Glass
▪▪ EMI ITO Mesh Filter Glass built-in (optional)
▪▪ 5 Resistive Touch Sensor with EMI Mesh Coating (optional)
▪▪ Flush Rack /Rack Mount Mechanical Design
▪▪ Convenient On-Screen Display Controls
▪▪ AC Power input/ Isolation Power built-in
▪▪ Auto-Dimming & Dimming Controls
▪▪ Military Grade Power Connector Model JY27466
▪▪ Operating Temperature -20°C to 60°C
» » Features & Benefits
9F,No. 111-6, Shing-De Rd., San-Chung City Taipei 241, Taiwan, R.O.C.
Tel: +886-2-8511-0288
Fax: +886-2-8511-0211
Contact Us: [email protected]
Winmate Communication Inc.
www.winmate.com.tw
» » Technical Specifications
Display Specifications
Model Name R20L100-RKA2ML
Active Display Area 408.0(H) x 306.0(V) mm
Pixel Pictch 0.255(H) x0.255 (V) mm
Brightness 300 cd/m2 (typical)
Viewing Angle -89~89 (H); -89~89(V)
Contrast Ratio 800:1
Response Time 14 ms (typical)
Display Colors 16.7 Million(8 bits/colors)
Synchronization Range
Horizontal: 31.5~80.0kHz
Vertical: 60~75 Hz
Input Interface 15 pin D-Sub, 5 x BNCs, DVI-D, RS232
Recommended
Resolution
1600 x 1200 @60Hz
Power Source
AC 100~240V, Universial ± 10%
DC 24V,± 10% (Optional)
Power Consumption 90W Typical, normal operation
Power Management VESA DPMS Compliant
Plug & Play VESA DDC 1/2B
Dimming Range 0~100 %
Light Sensor Yes (default)
RS232 Remote Control Optional
Glass Yes (default) Standard Anti Reflective Glass
EMI ITO Glass Optional, Transmittance 88%
Touch Screen Optional, 5 Resistive Touch Screen
EMI Mesh Touch Screen Optional, 5 Resistive Touch with EMI Mesh Filter
Optical bonding MOQ required
20.1 "
Military Grade Console Display
» » Ordering Information
Part Number Description
R20L100-RKA2ML/GS Anti-Reflective Glass (Default)
R20L100-RKA2ML/ITO ITO EMI shielding Glass *
R20L100-RKA2ML/ATR ELO 5 wired Resistive Touch Sensor (RS232 Interface)
R20L100-RKA2ML/ATR-ITO ELO 5 wired Resistive Touch with EMI Mesh Filter
*To have MIL-STD-461E Compliance, it shall have EMI -ITO Glass or Touch with
EMI Mesh Filter
» » Accessories»
Part Number
1. Military Grade 3 Pin Power Connector (conn. Type JY27466) 2 Meter
2. Military Display Quick Installation Guide (Paper)
3. Touch Driver CD (Optional)
4. DVI Shielding Cable 2 Meter
5. VGA Sheilding Cable 2 Meter
6. 5 BNCs to VGA Sheilding Cable 2 Meter
7. Touch RS232 Sheilding Cable 2 Meter (Optional)
8. RS232 Remote Control Sheilding Cable 2 Meter (Optional)
AC▪Power▪input DC▪Power▪input▪(Optional)