Impulse R10L600-OFP3_TR - Manual

Remarks:R10L600 series= VGA Input only
R10L630 series= VGA+Video Input
10.4"
Specifications
UNIT:mm
Sunlight Readable LCD
Mechanical Drawing
Ambient light(nit)
Brightness gain(BL off)(nit)
Reflectance(net)(%)
15,000 30,000 80,000
500 620 990
1.00% 0.90% 0.80%
Outdoor readability **
35°
Brightness measure
Angle
Specifications are subject to change without notice.
Reflectance rate will change by LCD panel ITO glass design and coating ratio.
* ：Average brightness measured at center point under bright after enhancement.
Actual number may deviate from this number due to orignal panel's brightness deviation.
**：Expected brightness under different ambient environment.
Simulated brightness number for reference.
* Note: this is a simplified drawing and some components are not marked in detail.
Please contact our sales representative if you need further product information.
1.0 First release Jul-21-10
Rev. Reasons Revised Date
2
R10L600-OFP3TR
10.4"
211.2(H)x158.4(V)
0.33 (H) x 0.33 (V)
640x480
700:1 (typ.)
16.2M (8bits/color)
540 (typ.)
-80~80 (H); -60~80 (V)
31.5~37.5KHz / 60~75Hz
640x480@60Hz, 75Hz
15 pin D-Sub
AC100~240V, Universal, 10%
15 W typical, normal operation
VESA DPMS Compliant
VESA DDC 1/2B
S-Video, Composite
No
Resistive, SAW, IR
±
Model Name
Viewable Size Image
Active Display Area(mm)
Pixel Pitch(mm)
Number of Pixels
Contrast Ratio
Display Color
Brightness(cd/m )
Viewing Angle(CR>=10)
Synchronization Range
Horizontal/Vertical
Recommended Resolution
Signal Connector
Power Source
Power Consumption
Power Management
Plug & Play
Optional Video Input
Optional DVI Input
Optional Touch Screen
1.1 Spec change Nov-15-10
1.2 Spec change Sep-20-11