Impulse R12L600-OFM2_TR - Manual

2
Model Name
Viewable Size Image
Active Display Area(mm)
Pixel Pitch(mm)
Number of Pixels
Contrast Ratio
Display Color
Brightness(cd/m )
Viewing Angle(CR>=10)
Synchronization Range
Horizontal/Vertical
Recommended Resolution
Signal Connector
Power Source
Power Consumption
Power Management
Plug & Play
Optional Video Input
Optional DVI Input
Optional Touch Screen
Remarks:R12L600 series= VGA Input only
R12L630 series= VGA+Video Input
R12L600-OFM2TR
12.1"
245.76(H)x184.32(V)
0.240(H)x0.240(V)(typ.)
1024x768
700:1(typ.)
262144(6bit/colors)
600 (typ.)
-80~80(H);-70~70(V)
31.5~60.0KHz/60~75Hz
1024x768@60Hz,75Hz
15 pin D-Sub
AC100~240V, Universal, 10%
20W typical, normal operation
VESA DPMS Compliant
VESA DDC 1/2B
S-Video, Composite
No
Resistive, Capacitive, SAW, IR
*
±
12.1"
Specifications
Sunlight Readable LCD
Mechanical Drawing
Optional protection glass
ection rate<0.5%)
Operation Temperature
(refi Optional
0 o o C~50 C
Ambient light(nit)
Brightness gain(nit)
Reflectance(net)(%)
15,000 30,000 80,000
500 620 990
1.0% 0.9% 0.8%
Outdoor readability **
35°
Brightness measure
Angle
Specifications are subject to change without notice.
Reflectance rate will change by LCD panel ITO glass design and coating ratio.
* ：Average brightness measured at center point under bright after enhancement.
Actual number may deviate from this number due to orignal panel's brightness deviation.
**：Expected brightness under different ambient environment.
Simulated brightness number for reference.
* Note: this is a simplified drawing and some components are not marked in detail.
Please contact our sales representative if you need further product information.
Rev. Reasons Revised Date
1.1 Spec change Aug-20-10
1.2 Spec change Jan-12-11
UNIT:mm
* Note: this is a simplified drawing and some components are not marked in detail.
Please contact our sales representative if you need further product information.
Rev. Reasons Revised Date
1.1 Spec change Jan-11-11
1.2 Spec change Apr-18-11 1.3 Spec change Dec-12-12