Impulse R10L600-OFP1_TR - Manual

2
Model Name
Viewable Size Image
Active Display Area(mm)
Pixel Pitch(mm)
Number of Pixels
Contrast Ratio
Display Color
Brightness(cd/m )
Viewing Angle(CR>=10)
Synchronization Range
Horizontal/Vertical
Recommended Resolution
Power Source
Power Consumption
Power Management
Plug & Play
Optional Video Input
Optional DVI Input
Optional Touch Screen
Remarks:R10L600 series= VGA Input only
R10L630 series= VGA+Video Input
R10L600-OFP1TR
10.4"
211.2(H)x158.4(V)
0.264(H)x0.264(V)
800x600
500:1(typ.)
16.2M
500
-70~70(H);-65~55(V)
31.5~46.9KHz/60~75Hz
800x600@60Hz,75Hz
15 pin D-Sub
AC100~240V, Universal, 10%
18W typical, normal operation
VESA DPMS Compliant
VESA DDC 1/2B
S-Video, Composite,DVI
No
Resistive,SAW,IR
*
±
10.4"
Specifications
UNIT:mm
Sunlight Readable LCD
Mechanical Drawing
Optional protection glass
ection rate<0.5%)
Operation Temperature
(refi Optional
0 o o C~50 C
Ambient light(nit)
Brightness gain(nit)
Reflectance(net)(%)
15,000 30,000 80,000
500 620 990
1.00% 0.90% 0.80%
Outdoor readability **
35°
Brightness measure
Angle
Specifications are subject to change without notice.
Reflectance rate will change by LCD panel ITO glass design and coating ratio.
* ：Average brightness measured at center point under bright after enhancement.
Actual number may deviate from this number due to orignal panel's brightness deviation.
**：Expected brightness under different ambient environment.
Simulated brightness number for reference.
* Note: this is a simplified drawing and some components are not marked in detail.
Please contact our sales representative if you need further product information.
1.1 Spec change Aug-20-10
Rev. Reasons Revised Date
1.2 Change new pic Mar-11-13
1.3 Jun-03-13 Pic change
Signal Connector