Impulse R08T200-65T1 - Manual

2
8.4" (Stainless Design)
Specifications
Mechanical Drawing
Full IP65 Chassis LCD
Optional:
black, high polish, vanished coating
Standard:
brushed stainless
UNIT:mm
Rev. Reasons Revised Date
Model Name
Viewable Size Image
Active Display Area(mm)
Pixel Pitch(mm)
Number of Pixels
Contrast Ratio
Display Color
Brightness(cd/m )
Viewing Angle(CR>=10)
Synchronization Range
Horizontal/Vertical
Recommended Resolution
Signal Connector
I/O
Power Source
Power Consumption
Power Management
Plug & Play
Optional Touch Screen
Optional video
Stainless Material
*Due to Panel material's deviation, different panel supplier will set different specific
variance range to optical characteristics. The factors of time used, Lamp current,
Ambient temperature will influence the optical measurements.
R08T200-65T1
8.4"
170.4 (H) x 127.8 (V)
0.213 (H) x 0.213 (V)
800x600
600:1(typ.)
262,144 (6bits/color)
450 (typ.)
-75~75(H);-75~75(V)
31.5~46.9KHz / 60~75Hz
800x600@60Hz, 75Hz
D-Sub 15pin
3 pin Power cable(IP65 connector);
10 pin VGA cable (IP65 connector);
Optional 10 pin RS232 or USB cable(IP65 connector)
DC12V
25W typical, normal operation
VESA DPMS Compliant
VESA DDC 1/2B
Resistive
Yes
Note: this is a simplified drawing and some components are not marked in detail.
Please contact our sales representative if you need further product information.
CNS
304 JIS
SUS304 ASTM
S30400 AISI
304 DIM
1.4301
1.1 Spec change Oct-12-10
1.2 Spec change Dec-13-10
1.3 Spec change Jan-05-11