Impulse SCMXRK-002 - Manual

Visit our website www.dataforth.com 137
SensorLex ® 8B Isolated Analog Signal Conditioning Products 8B
8B
©1995-2009 Dataforth Corporation, All Rights Reserved ISO9001:2000-Registered QMS
8BP01
Single Channel DIN Rail Mount Carrier
Description
The 8BP01 is offered as a 5VDC powered (8BP01-X05) or 7VDC to 34VDC
(8BP01-X24) powered single channel DIN rail mount carrier suitable for any 8B
signal conditioner. The 8B carrier can be mounted on any standard DIN rail
Figure 1: 8BP01 Single Channel DIN Rail Mount Carrier
Features
• Single Channel DIN Rail Mounting Accessory
• 2-, 4-, 8-, 16-Position Backpanels
• 19-Inch Mounting Rack For Backpanels
Accessories for 8B Analog Modules
• Interface Cables
• Cable-to-Screw-Terminal Interface Board
• Power Supplies
Specifications
(EN 50022-35 and EN 50035-G32). The 8BP01 measures only 2.32” x 3.54” x
0.65” (59mm x 90mm x 16.5mm), making it ideal for use in high-density
installations (see Figure 1).
Module 8BP01-X05 8BP01-X24
Specifications Typical at T
A
=+25°C and +5V power Typical at T
A
=+25°C and +24V power
Input Voltage Range 4.85 to 5.2VDC 7 to 34VDC
Over-Voltage Protection 6V TVS, 1A Fuse, OV detection 36V TVS, 1A Fuse, OV detection
Over-Voltage Shutdown Voltage 5.6V max 35.5V max
Under-Voltage Turn-on – 6.5V min
Reverse Voltage Protection 1A Fuse 1A Fuse
Output Voltage Regulation – 5VDC ±1%
Power Indicator Green LED Green LED
Output Voltage Temp. Coeff. ±200ppm/°C ±200ppm/°C
Output Current 250mA max (–40°C to +85°C) 250mA max (–40°C to +85°C)
Output Current Limit – 0.8A, Auto Recovery
Line Regulation – ±0.25%
Load Regulation – ±0.5%
Efficiency – 75%
Output Ripple – <50mVpk-pk
Mechanical Dimensions 2.32" x 3.54" x 0.65" 2.32" x 3.54" x 0.65"
(h)(w)(d) (59mm x 90mm x 16.5mm) (59mm x 90mm x 16.5mm)
Ordering Information
Part Number Description
8BP01-205 5V Power, No CJC
8BP01-305 5V Power, CJC
8BP01-224 24V Power, No CJC
8BP01-324 24V Power, CJC