Impulse 3088 - Manual (Page 4)

Introduction
Sealevel Systems DUOCOM: Page 1
Introduction
Overview
The Sealevel Systems DUOCOM: provides the PC with 2 Asynchronous serial
ports providing a versatile interface for common RS-232 needs (i.e. modem,
mouse and plotters).
What’s Included
The DUOCOM: is shipped with the following items. If any of these items are
missing or damaged, contact the supplier.
• DUOCOM: Serial I/O Adapter
• Sealevel Software
Factory Default Settings
The DUOCOM: factory default settings are as follows:
Port # Base Address IRQ
Port 1 280 5
Port 2 288 10
To install the DUOCOM: using factory default settings, refer to Installation on
page 6.
For your reference, record installed DUOCOM: settings below:
Port # Base Address IRQ
Port 1
Port 2