Laurel Electronics Laureate AC Power Factor Meter & AC Phase Angle Meter User Manual

Page 5

Advertising
background image

LAUREL

ELECTRONICS INC., 3183-G Airway Ave., Costa Mesa, CA 92626, USA • Tel 714-434-6131 • www.laurels.com 5

Ordering Guide

Create a model a model number in this format: L70000FR, IPC

L7 Extended Main Board, Green LEDs
L8 Extended Main Board, Red LEDs

Main Board

Note 1: Use of the Extended Main Board also makes this counter suitable for A-B time
interval, stopwatch, frequency, rate, period, square root of rate, up or down total,
arithmetic functions, simultaneous rate and total, duty cycle, batching, and custom
curve linearization.
Note 2: If the meter is to be used for power factor, please so indicate in a note at the
time order.

Power

0 Isolated 85-264 Vac
1 Isolated 12-32 Vac or 10-48 Vdc

Relay Output
(isolated)

0 None
1 Two 8A Contact Relays
2 Two 120 mA Solid State Relays
3 Four 8A Contact Relays
4 Four 120 mA Solid State Relays

Analog Output
(isolated)

0 None
1 Single isolated 4-20 mA, 0-20 mA, 0-10 V, -10 to +10V
2 Dual isolated 4-20 mA, 0-20 mA, 0-10V

Digital Interface
(isolated)

0 None
1 RS-232
2 RS485 (dual RJ11 connectors)
4 RS485 Modbus (dual RJ45 connectors)
5 USB
6 USB-to-RS485 converter
7 Ethernet
8 Ethernet-to-RS485 converter

Input Type

FR Dual-Channel Pulse Input Signal Conditioner

Add-on Options

BL

Blank lens without button pads

CBL01 RJ11-to-DB9 cable
CBL02 USB-to-DB9 adapter
CBL05 USB Cable, A to B
IPC

Clear front panel cover sealed to NEMA 4X / IP65

BOX1 NEMA-4X wall-mount enclosure
BOX2

BOX1 plus IPC

Advertising