L-com HA2401RTGX - Manual (Page 2)

HA2401RTGX Series Amplifier User Manual
For Model Numbers: HA2401RTGX-500/1000
FCC PART 15 NOTICE: THIS AMPLIFIER CAN BE USED ONLY IN A SYSTEM
WHICH IT HAS OBTAINED AUTHORIZATION. THE AUTHORIZED SYSTEM BY FCC
INDENTIFIER IS: MYF-XI-325X
This manual covers the basic mounting and installation instructions for the
amplifier unit only. Please refer to the WLKIT-GX-GXI Series Kits User Manual
or the PC Card User Manual for PC card and software installation instructions as
well as a complete list of certified antennas and system components.
Connecting the Amplifier
Amplifier connections are clearly labeled on the amplifier unit as shown below.
1. Connect the Antenna to the Amplifier output labeled “ANTENNA”.
2. Connect the DC Injector output labeled “TO AMPLIFIER” to the Amplifier input labeled “RADIO”.
3. Connect the Radio to the DC Injector input labeled “TO RADIO” using the pigtail cable.
4. Plug the AC Adapter into the DC Injectors DC power jack and wall outlet.
Copyright © This drawing is property of L-com Global Connectivity. All rights reserved.
L-COM, INC. 45 BEECHWOOD DRIVE NORTH ANDOVER, MA 01845
WWW.L-COM.COM E-MAIL: [email protected] PHONE: 1-800-343-1455 FAX: 1-978-689-9484
© L-com, Inc. All Rights Reserved. L-com Global Connectivity and the L-com logo are registered marks.