L-com HG2409P, HG2409PC, HG5308P, HG5808P, RE09P - Manual (Page 2)

IP-00012 Rev. C – 04/07 Page 2/2
MOUNTING INSTRUCTIONS
Models: HG2409P, HG2409PC
HG5308P, HG5808P
HG1908P, RE09P
Hyperlink's patch antennas offer several unique
mounting options. They can be mounted flat against
a wall, or to a mast using a pair of 2 inch U-bolts.
They also accept most tilt-and-swivel security
camera brackets equipped with standard 1/4-20
threads. (See below for optional mounting
Kits)
OPTIONAL MOUNTING KITS
(Sold Separately)
HGX-PMT03 - Medium Plastic
Tilt-and-Swivel Wall/Desktop
Mounting Bracket
HGX-PMT02 - Small Metal
Tilt-and-Swivel Wall
Mounting Bracket
Vertical Polarized
Mounting
Horizontal Polarized
Mounting
HGX-PMT04 - Large Metal
Tilt-and-Swivel Mounting
Bracket for Wall or Mast
mounting
HGX-PMT07 – Stationary
Mounting Kit for mast
mounting
HGX-PMT08 – Window
Mounting Kit
The HG2409P, HG5308P, HG5808P, HG1908P and RE09P antennas
can be mounted for Vertical or Horizontal polarization.
For Vertical Polarization, the cable should be exiting from either the
top or bottom of antenna.
For Horizontal Polarization, the cable should be exiting from either
right or left side of the antenna.
Copyright © This drawing is property of L-com Global Connectivity. All rights reserved.
L-COM, INC. 45 BEECHWOOD DRIVE NORTH ANDOVER, MA 01845
WWW.L-COM.COM E-MAIL: [email protected] PHONE: 1-800-343-1455 FAX: 1-978-689-9484
© L-com, Inc. All Rights Reserved. L-com Global Connectivity and the L-com logo are registered marks.