Mounting instructions, Optional mounting kits – L-com HG2414P-XX, HG908P-XX, RE14P-XX User Manual
Page 2
Copyright © This drawing is property of L-com Global Connectivity. All rights reserved.
IP-00014 Rev. C – 04/07 Page 2/2
MOUNTING INSTRUCTIONS
Models: HG2414P-XX, HG2614P-XX
HG3414P-XX, HG908P-XX,
RE1208P-XX, RE14P-XX
HG1912P-XX
Hyperlink's patch antennas offer several unique
mounting options. They can be mounted flat against
a wall, or to a mast using a pair of 2 inch U-bolts.
They also accept most tilt-and-swivel security
camera brackets equipped with standard 1/4-20
threads. (See below for optional mounting Kits)
OPTIONAL MOUNTING KITS
(Sold Separately)
HGX-PMT03 - Medium Plastic
Tilt-and-Swivel Wall/Desktop
Mounting Bracket
HGX-PMT02 - Small Metal
Tilt-and-Swivel Wall
Mounting Bracket
Vertical Polarized
Mounting
Horizontal Polarized
Mounting
HGX-PMT04 - Large Metal
Tilt-and-Swivel Mounting
Bracket for Wall or Mast
mounting
HGX-PMT08 – Window
Mounting Kit
This antenna can be mounted for Vertical or
Horizontal polarization.
For Vertical Polarization, the cable should be exiting from either the
top or bottom of antenna.
For Horizontal Polarization, the cable should be exiting from either
right or left side of the antenna.
HGX-PMT07 – Stationary
Mounting Kit for mast
mounting
HGX-PMT06 – 60 Degree
Tilt-and-Swivel Mounting
Kit for mast mounting.
L-COM, INC. 45 BEECHWOOD DRIVE NORTH ANDOVER, MA 01845
WWW.L-COM.COM E-MAIL: [email protected] PHONE: 1-800-343-1455 FAX: 1-978-689-9484
© L-com, Inc. All Rights Reserved. L-com Global Connectivity and the L-com logo are registered marks.