Ip-00059, Installation instructions – L-com HG5808U User Manual
Page 2
IP-00059 Rev. A – 08/05 Page 1/1
www.L-com.com
Antenna Base
Mast - 2" (50.8mm) O.D Max.
U-Bolts
Mounting Bracket
Antenna Mounting
Nut & Washer
Drain Holes
Mounting Instructions
1. Attach mounting bracket to mast as shown using (2) U-bolts and
supplied hardware.
2. Remove antenna mounting bolt and washer from antenna base.
3. Insert antenna into mounting bracket and secure with washer and
antenna mounting nut. Do not over tighten.
Note: Some models may have drain holes in the antenna base. When
installing, drain holes must be kept clear for proper operation.
Installation Instructions
Models: HGV-2404U, HGV-2406U, HGV-2409U
HGV-4907U, HG5310U, HG5808U, HG5812U
Note: Antenna Base may vary from photo
Copyright © This drawing is property of L-com Global Connectivity. All rights reserved.
L-COM, INC. 45 BEECHWOOD DRIVE NORTH ANDOVER, MA 01845
WWW.L-COM.COM E-MAIL: [email protected] PHONE: 1-800-343-1455 FAX: 1-978-689-9484
© L-com, Inc. All Rights Reserved. L-com Global Connectivity and the L-com logo are registered marks.