L-com HG3511U-PRO - Manual (Page 2)

IP-00088 Rev. A – 12/06 Page 2/2
Copyright © This drawing is property of L-com Global Connectivity. All rights reserved.
L-COM, INC. 45 BEECHWOOD DRIVE NORTH ANDOVER, MA 01845
WWW.L-COM.COM E-MAIL: [email protected] PHONE: 1-800-343-1455 FAX: 1-978-689-9484
© L-com, Inc. All Rights Reserved. L-com Global Connectivity and the L-com logo are registered marks.
1. Secure antenna to mast using the two supplied mast clamps. Clamps should be positioned
in the two channels on the antenna base as shown.
Note: Vent holes on the bottom of the antenna base must be kept clear, do not tape up
around bottom base of antenna.
Installation Instructions
Models: HG5812U-PRO
HG3511U-PRO
1.4" (35 mm) to 2" (50 mm) dia. mast
Antenna
Mast Clamps
Antenna Base
Clamp Channel
Clamp Channel
Vent Holes