LEADER PHABRIX RX2000 - Manual

The “Top of the Range” Rx2000 with 2 built-in screens along
with HDMI/SDI output makes this an ideal instrument for outside
broadcast facilities and engineering bays. Confidence is assured
with both video screen and instrumentation available at point of
source and MCR with a simple touch of a button control. Video
and audio sources are easily selected using the input button
control. The focused ergonomics of the Rx mean instruments are
never more than two button presses from top level to instrument
parameter control.
Clever “tilt-in-bay” engineering allows the Rx2000 to be seen at
various eye levels. The Rx2000 benefits from an angled slim profile
of only 13cm of depth. As with all of the Rx range, each instrument
is very lightweight and benefits from very low power consumption.
The Rx2000 can take up to four modules offering 8 simultaneous
SDI channels. Optical is supported via SFP which can be inserted
into the cage built into each module providing 8 optical channel
support, if required.
With a choice of video and audio modules within its slim 2U profile,
the Rx2000 can be found in a range of broadcast environments.
Modules are constantly being added to the range with both video
and audio support. Physical layer measurement is available as a
single eye or dual eye analyzer module.
The Rx2000 supports 16 channels of embedded audio as standard
and comes complete with full range stereo speakers. Additionally
there is a standard audio jack provided on the front of the instrument
for earphones. A front mounted USB port is available for data grab
and off-line parameter storage.
PHABRIX ® R
X
2000
Dual Screen Rasterizer
FEATURE HIGHLIGHTS:
• 3 IN 1, GENERATOR / ANALYZER /
MONITOR
• 3G-SDI, HD-SDI, SD-SDI
• HDMI OUTPUT
• UP TO 8 SIMULTANEOUS SDI
CHANNELS
• DUAL SCREEN TFT 480x722
PIXELS
• 4 INTEGRATED MODULE SLOTS
• TILT MECHANISM FOR
DIFFERENT VIEW ANGLES
• INTERNAL STEREO
LOUDSPEAKER
• EXTERNAL TEMPERATURE
CONTROLLED FAN
• EMBEDDED AUDIO 16 CHANNELS
DISPLAYED SIMULTANEOUSLY