Specifications – Lectrosonics R172 User Manual
Page 12
SPECIFICATIONS
Operating frequencies:
150 to 216 MHz crystal controlled
Sensitivity:
1.0uV for 20dB SINAD
2.0uV for 50dB S/N ratio
Signal/noise ratio:
96 dB A-weighted
Squelch quieting:
greater than 96 dB
AM rejection:
better than -40 dB
(10uV to 0.1 volts)
Modulation acceptance:
+/- 15KHz
Image/spurious rejection:
greater than 100 dB
Audio outputs:
* XLR: 200 ohm balanced; 100mV max.
* RCA: 1K ohm unbalanced; 1 volt max.
Audio input:
RCA jack for unity gain audio mixing bus
Antenna input:
BNC connectors; 50 ohm impedance
Controls:
OUTPUT LEVEL attenuators control A & B
balanced outputs;
POWER switch
SEPARATE/MIXED audio switch
SNGL/DUAL ANTENNA MODE switch
Indicators:
POWER LED for power "ON"
MODULATION LEDs for
modulation level on each channel
"RF" LED
Power requirements:
* 12 volt DC direct to panel mounted jack
* 110 volt AC via CH-12 AC adapter
Power consumption:
125 mA max.
Weight:
2 lbs 5 oz.
Dimensions:
2.9H x 5.3W x 7.4D inches
11