Specifications – Lectrosonics UMC195d User Manual
Page 8
UHF and VHF
SPECIFICATIONS
RF Gain:
0.5 to 1.5dB
Bandwidth
VHF:
Factory tunable to any 4 MHz band from 150 to 216MHz.
Specified at time of order.
UHF:
Factory tunable to any 18MHz band from 470 to 608MHz.
Specified at time of order.
RF Outputs
Standard:
Four outputs, 50 Ohm, BNC
Diversity:
Eight outputs, 50 Ohm, BNC
Isolation:
25dB min, any output to any output
Any output can be open, shorted, or terminated without affecting
other outputs.
Splitter type:
Wilkinson 1/4 wave
Filtering:
UHF:
Two pole ceramic filter per antenna
VHF:
Two section helical resonator per antenna
Noise figure
VHF:
3.5dB
UHF:
3.5dB
Third Order Intercept:
+19 dBm
Power Input:
+12 to +24VDC
Power Consumption:
Standard:
70mA
Diversity:
140mA
Connectors:
RF:
BNC
Power Output:
5.5mm OD/2mm ID coaxial power jack
Short Circuit Protection:
Auto-reset thermal fuses
Construction:
Machined aluminum panels, housings, and mechanical parts.
Dimensions:
19" wide, 1.75" high, 6.5" deep
Weight:
5 lbs including 4 receivers
Specifications subject to change without notice.
8