Optional mounting adapter kit, Lectrosonics, inc, Specifications – Lectrosonics ALP600 User Manual
Page 2: Typical vertical pattern, Typical horizontal pattern orientation
maximum sensitivity
Optional Mounting Adapter Kit
Threaded adapter for photo/video
tripod mounting. 1/2” diameter x 1
3/4” long. 3/8”-16 thread on one
Threaded adapter for
end, 1/4”-20 on the other.
standard lighting clamps.
1/2” diameter x 6 inch long.
3/8”-16 thread - both ends.
Microphone stand adapter.
5/8”- 27 thread with 3/8”-16 thread
in other end x 1 1/2” long.
A mounting adapter kit is available (part # ALPKIT) that
contains three adapters threaded to fit the stud supplied with
the antenna. The kit allows mounting on photo and video
tripods, lighting equipment, and standard microphone stands.
Constructed of stainless steel for lasting durability.
90
o
10
5
0
-5
-10
-15
-20
-25
30
60
120
150
240
270
o
300
330
0
o
210
180
o
90
o
10
5
0
-5
-10
-15
-20
-25
30
60
120
150
210
240
270
o
300
330
0
o
180
o
Specifications
Gain:
+7dBi (isotropic)
+4dBd (over dipole)
Range:
450-850 MHz
Weight:
15.6 ozs
Connector:
50 ohm BNC
Dimensions:
13.5” long x 12.25” wide
10.75” x 11” tall
Typical Vertical Pattern
maximum sensitivity
Typical Horizontal Pattern
ORIENTATION
A wireless transmitter antenna is generally ori
ented vertically, therefore, the ALP600 should also
be oriented vertically. Note the “up” arrow on the
antenna. The transmitter antenna should be par
allel with the plane of the ALP600 antenna as
depicted above.
ALP600-0400
LECTROSONICS, INC.
581 Laser Rd. NE - Rio Rancho, NM - 87124 USA
(505) 892-4501 (800) 821-1121 Fax(505) 892-6243
www.lectrosonics.com