Lectrosonics DM812 - Manual (Page 5)

DM Series Installation Guide
Rio Rancho, NM 5
Introduction
The purpose of this guide is to assist in the setup and
operation of a typical DM system. This guide assumes
familiarity with the DM Series Digital Audio Processors,
its components and software menus and setup screens.
To get the most out of the DM system, it is suggested
to review the information presented in the DM Series
Reference Manual.
A detailed online Help is also available to assist in the
setup and operation of a DM system using the USB
interface and a Windows ® XP, Vista or 7 operating sys-
tem. In addition to assistance setting up and operating
the DM system, the Help includes a complete listing of
the DM General Commands. These commands can be
used to setup and operate the DM system via external
devices using either the USB or RS232 serial port.
Unpacking the Unit
Compare the packing list enclosed with the unit with
the original order. Inspect all items for damage. Im-
mediately call 1-800-821-1121 to report any items that
are missing or damaged. The sooner we get notified,
the sooner we can get any needed replacement items
shipped to your location.
Items Included in the Box:
• Installation Guide
• Power cable
• 5-pin de-pluggable connectors:
20 each for the DM1624
14 each for the DM1612
10 each for the DM812
• CAT-5e cables (2 each) 12” with shielded RJ45 con-
nectors
• Lectrosonics screwdriver
• DB9 to TRS (Stereo mini) cable – BLACK - for lap-
top setup
• DB9 to TRS (Stereo mini) cable – RED - for touch
panel control systems
• USB cable
• CD-ROM with LecNet2 software and documenta-
tion in Acrobat PDF files
If there are any problems or items missing, immediately
call 1-800-821-1121 and ask for anyone in sales or
service.
Windows is a registered trademark of Microsoft Corp.