Lectrosonics, Operating instructions, Specifications – Lectrosonics NS1 User Manual

Page 2

Advertising
background image

Operating Instructions

The NS1 provides a number of features to allow quick The level of this signal is controlled by the front panel
and easy setup of microphones and sound systems.

O

UTPUT

knob. This control has no effect on the speaker

output. The maximum level available at the rear panel
XLR jack is 0dBm.

NOISE BANDWIDTH

The bandwidth of the noise can be selected from the

EXTERNAL AUDIO MONITOR

front panel via the 3

K

H

Z

/P

INK

slide switch.

The E

XT

. A

UDIO

I

N

jack on the front panel offers a conve-

Pink: In this position, the NS1 will output wideband

nient point to connect an external signal to be monitored

pink noise for general purpose testing and level setting.

through the built-in speaker. The S

PKR

control will con­

3 kHz: This position of the switch will output a pink trol the level of this signal

noise signal which is bandpass filtered by a 1/3 octave

T

IP

is signal Hi,

filter centered around 3 kHz.

R

ING

is not used.

S

LEEVE

is Ground,

OUTPUT XLR

This is a switching type of jack. With nothing plugged in,

The selected noise source (Wideband Pink or 3 kHz the internal noise source is routed to the speaker. When
Pink) is available on the rear panel XLR jack in fully an external signal source is plugged in, it is routed to the
balanced form.

internal speaker and the NS1s noise source is discon­
nected from the speaker. However, the NS1 generated

P

IN

1 is Ground

noise is still available at the rear panel XLR.

P

IN

2 is Signal Hi

P

IN

3 is Signal Lo

OUTPUT

BALANCED

3kHz FILTERED

LEVEL

OUTPUT

PREAMP/BUFFER

PINK

NOISE

BALANCED

DRIVER

R

TS

T

Ext. Audio

In

2½"

INTERNAL

SPEAKER

SPEAKER

LEVEL

POWER

AMPLIFIER

WHITE NOISE

GENERATOR

PINK NOISE

FILTER

3kHz

BANDPASS

FILTER

BALANCED
OUTPUT
FUNCTION
SWITCH

PINK NOISE

S

Specifications

Outputs:

• 63 to 93 dB SPL, speaker
• 0 dBm, balanced line

Battery Life:

• 35 to 40 hours, line output only
• 3 hours w/speaker at full volume

Power Supply: 2 ea 9V alkaline batteries

External
Input Level:

–10 dBu to +4 dBu;
20 dB gain from ¼” input to speaker

NS1-0799

LECTROSONICS

®

581 Laser Rd NE - Rio Rancho, NM - 87124 USA
(800)821-1121 (505)892-4501 Fax(505)892-6243
www.lectrosonics.com

[email protected]

Advertising