Liquid Controls HMS501, HMS600, HMS1000, HMS2400, HMS2500, and HMS5000 LC Mag IOM - Manual (Page 4)

4
Installation
Flow Direction
Before installing the sensor, confirm the direction of the
liquid flow in the piping. The sign of the flow rate is posi-
tive, when the flow direction is from - to + as printed on
the nameplate on the sensor body.
If flow direction is reversed after the installation, it is suf-
ficient to reverse the sign of the KA coefficient in the con-
verter (refer to converter installation manual).
Lifting Meters with Eyebolts
Recommended hoisting procedure for sensors with lift-
ing eyebolts.
NOTE: For sensor models HMS1000 and larger, the use
of centering cylinders is recommended.
To facilitate installation, sensors with nominal diameter
greater than 6" are provided with eyebolts that must be
used for lifting as illustrated in the drawing to the right.