Liquid Controls HAZARDS PRECISION TURBINE FLOWMETERS User Manual
Page 5
5
PRODUCT SELECTION
Sponsler components are metallurgically designed to be physically compatible with the given type of
liquid. For information on fluid and component compatibility please contact factor.
A meter should not be used with a liquid different from the one specified. This could cause components to
corrode and result in leaks. It is the end users responsibility to evaluate the suitability of the liquid with
regard to safety of personnel, safety of compression, material compatibility, weight and density
consideration, venting, draining, and disposal.
It is critical to select the right Sponsler product for the fluid and system into which the products will be
installed. Contact Sponsler for technical guidance:
• For extraordinary service conditions
• In case of non-standard functions and characteristics of the products being required for service