Liquid Controls SP3000 - Manual (Page 63)

63
EXAMINE low output
EXAMINE high output
EXAMINE scale output
EXAMINE ALARM
EXAMINEs current alarm condition
EXAMINE TIME
EXAMINEs real time clock’s time
EXAMINE DATE
EXAMINEs real time clock’s date
EXAMINE SERIAL
EXAMINEs the setting of the instrument for ID number, Baud Rate, and Print Interval
EXAMINE EXCEPTION
EXAMINEs if Exception Reporting if turned ON or OFF
EXAMINE RESULTS
EXAMINEs all items on the display list
EXAMINE LIST
EXAMINEs the list of parameters that will be printed during operations.
RUN COMMAND
Reference: See Section 3.0
Function: Starts the instrument running, just like “RUN” on the main menu. Display reads: Show
Data? Optionally “GO” may be used in the same capacity.
Example: RUN (CR)
STOP COMMAND
Function: Stops the instrument. from. Display reads: Run? Optionally, “Standby” may be used in
the same capacity.
Example: Stop (CR)
CLEAR COMMAND
Reference: See Section 4 and 5
Function: Clear Alarm or Clear Totalizer
This command consists of two words, the first being CLEAR and the second being either ALARM or TOTALIZER.
Example:
CLEAR Alarm (CR)
CLEAR Totalizer (CR)