Addonics Technologies HDU11SITDR - Manual (Page 10)

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
10-02. Setup
Copy Size
Press ENT and the LCD will display a detailed list of options as shown below
Use the Up and Down arrow keys to choose different copy si zes. The system will offer their
corresponding percentages so the user can specify the amount to copy from the source hard disk.
Press ENT to confirm and save the changes.
Copy Size
100%~1% (*MB)
Startup Menu
This option allows you to set an option other than "Se tup" to be displayed as the first available
option on the menu every time you start the system.
Startup Menu
1. Copy HDD
Press ENT then use the Up and Down arrow keys to choose other options. By default the first
menu option is Copy HDD.
10-03. Setup
Startup Menu
Auto Compare
This option automatically compares the source hard disk with the target hard disk after a copy
operation is completed.
Press ENT to access option. By default it is set to Off. Use the Up and Down arrow keys to choose
On.
Auto Compare
Off
10-04. Setup
Auto Compare
Copy Size
This option is used to specify the size of the source hard disk for simplifying further copying
operations.
Button Sound
This option is used to control the sound of a button when you press it.
10-05. Setup
Button Sound
Press ENT and the LCD will display the following info. Use the Up and Down arrow keys to choose
whether button sound is on or off.
Button Sound
On