Magnum Venus Plastech PATRIOT TESTING & ADJUSTING - Manual (Page 53)

Patriot - Testing & Adjusting Manual
Rev. 01/2013 Page | 53
TEST NOTES
Name of materials being used:
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
Catalyst Percentage: __________%
Catalyst type: _________________________________________________________
Material is being:  Sprayed  Poured 
Other:_____________________________
This material was successfully applied under the following conditions:
 Winter  Spring  Summer  Fall
Air temperature of the factory ________ degrees
Relative humidity of the factory _______ %
Other conditions:
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________
Power head pressure________________psi
Catalyst Accumulator charge _____________psi
Resin Accumulator charge _______________psi
In-line Heater setting __________________
Nozzle size _________________
Nozzle Fan Angle _______________degrees