Magnum Venus Plastech UltraMAX VLS-2400 Series - Manual (Page 24)

VLS-2400 Series Fluid Section Manual
Rev. 08/2013 Page | 24
ANNUAL MAINTENANCE CHECKLIST:
PART PROCEDURE
Ai r Filter (“Water Trap”) Drain. Repair any leaks or damage.
Gauges and Regulators Check for damage and proper operation.
Accumulator Remove and clean inside. Replace the O-Rings. Danger:
Never attempt to remove an accumulator until you have
relieved pressure. See Accumulator & Filter section.
Filter Clean and inspect filter screen for plugging. Note: Clean
the screen weekly and when changing from one material
to another. Use proper screen mesh size according to
the material being used.
Fluid Section Replace the oil in the oil reservoir. Clean and dry the
silencers. Check piston rod, trip sleeve, cylinder head and
piston for wear or damage, replace as required. Replace the
O-Rings, piston cups and packing set. Rebuild lower
assembly.