Magnum Venus Plastech INNOVATOR PRO 5000 (8003) - Manual (Page 28)

MAGNUM VENUS PLASTECH Innovator Pro Manual 28
Control Box User Connections - Rear:
The rear of the control box features the following user connections shown in figure 7:
• 4 air supplies – These can be used to supply machine options.
• Pump run signal – This signal is pressurized when the pump receives a
run signal in recirculation or injection modes. It can be used to control items
such as resin heaters.
Figure 7 – Rear User Connections
The accumulator charge hose connection is also situated at the rear of the control
box.