Magnum Venus Plastech Powerhead Powerslide VPH-2500 - Manual (Page 4)

Powerslide Powerhead
Powerslide Powerhead
Introduction
Chapter
1
This manual covers both the 4” and 5-5/8” stroke length air motors. When there is a
part difference between the two air motors the 4” stroke is referred by VPH and the 5-
5/8” air motor will be referred by MPH. The reassembly will require the use of removable
Lock Tite
® and Lithium grease.
NOTE
Before starting any service work, release fluid and air pressure from
system. Remove the two air lines from the air motor. The air motor
assembly does not have to be completely removed from the system for
service work.
Please read the manual carefully. Follow the steps in the order given, otherwise you
may damage the equipment or injure yourself.
During Disassembly . . .
As you disassemble the equipment, lay out the components in the correct order and
direction, and have all component drawings available to refer to prior to disassembly.
This will help you to reassemble them.