Magnum Venus Plastech Megaject MKIV Revision 1_6 - Manual

Megaject MK V Issue 1_6 Page 1 of 41
Megaject MKV
Manufacturing Technology Centre,
Chilsworthy Beam,
Gunnislake, Cornwall, PL18 9AT, UK
Tel: +44(0)1822 832621 Fax: +44(0)1822 833999
e-mail: [email protected]
http://www.plastech.co.uk
Instruction Manual
Revision 1_6
Machine Serial Number:
SAFETY MESSAGE
All fittings, components, seals and hoses are selected and
fitted specifically to this machine to ensure that they are
compatible with the fluid materials to be used, therefore on
no account should any Magnum Venus Plastech (MVP),
factory fitted parts be replaced by non MVP components.
This is especially relevant to the catalyst fluid section. -
Stainless steel or plastic fittings MUST NOT be replaced
during a machine service with non-compatible fittings made
from inappropriate materials (such as brass), as contact
between an organic peroxide catalyst and fittings of a non
compatible material can cause a violent reaction and
explosion.