Magnum Venus Plastech SUPER PRO GUN II - Manual (Page 21)

SUPER PRO GUN &
SUPER PRO GUN II
Fig. 4.4
Fig. 4.3
Rubber Roll Assembly
5. Press the 5103-6-1 (Rubber Roll) onto the 5103-5-01 (Mandrel
Assembly). Secure the Rubber Roll by inserting the 7205-3-31
(E-Ring) into the groove in the Mandrel. See Fig. 4.4.
6. Insert the Mandrel/Rubber Roll Assembly into the top of the T-Slot
on the 5103-1-1 (Base Plate). Align the 5103-4-1 (Slide Adjust
Nut) with the T-Slot. See Fig. 4.5.
Fig. 4.5
16