Magnum Venus Plastech TALON Gun External Mix - Manual (Page 21)

Talon External Mix Gun Manual
Rev. 10/2013 Page | 21
Front of the Gun:
1. Brush Solvent on the front of the Catalyst Tip and Spray Tip to properly clean.
2. Unscrew the Retaining Ring from the front of the gun head.
3. Remove the Catalyst Tip from the front of the gun head. Push the Spray Tip free of
the Catalyst Tip if it comes out with the catalyst tip.
4. Thoroughly clean both the Catalyst Tip and Spray Tip. Clean the front of the Gun
Head.
5. Replace O-rings as necessary and reassembly.
Gelcoat Gun Front
– Premium Spray Tip:
Gun Head
O-ring – Gun Head
O-ring – Catalyst Tip
Premium Spray Tip
Catalyst Tip
Retaining Ring
Spray Tip – O-rings