Luminex 200 LDS User Manual Update - Manual (Page 6)

Safety Addendum: Luminex 200 with LDS 1.7
PN 89-00002-00-240 Rev A 6
The following label appears on the back of the Luminex 200
instrument.
Under NO circumstances should you remove the Luminex 200
analyzer cover! When performing routine maintenance, turn power
to the Luminex 200 analyzer OFF and disconnect the power cord.
All laser apertures are located within the Luminex 200 analyzer and
are contained within a protective housing. This label appears on the
optics cover within the Luminex 200 analyzer.
Warning: Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.