4 cabling, English – Atlantis Land A02-IPCAM2-W54 User Manual
Page 18
ENGLISH
18
2 Antenna
Connector
There is the SMA type antenna
connector located on the rear
panel of the Wireless Internet
Camera, providing connection
for one high sensitivity antenna
included in the package
3 Reset
Button
After the device has turned on,
press it to reset the device or
restore to factory default
settings. The operation is as
below:
1 seconds: reset the device
3 seconds: seconds or above:
restore to factory default
settings
4 POWER
(jack)
Connect the supplied power
adapter to this jack
1.4 Cabling
Connect an Ethernet cable to the network cable connector
located on the camera’s rear panel, and then attach it to the
network. Then screw the external Antenna that came with
the Wireless Internet Camera into the antenna connector.